Rheological properties of polypropylene modified by high‐intensity ultrasonic waves

A new method using high‐intensity ultrasonic waves, instead of peroxide‐aided reactive extrusion, was applied to modify a linear polypropylene into a branched structure. The ultrasonic waves induced chain scission and created reactive macromolecules of polypropylene successfully in the melt state without any peroxide. To enhance and control the recombination reaction during sonication, a multifunctional agent and an antioxidant were used. The rheological property measurements clearly confirmed that the modified polypropylene had a nonlinear branched structure. It showed shear‐thinning behaviors in its viscosities at low frequencies, high elastic behaviors in Cole–Cole plots, and a high rheological polydispersity index in comparison with a linear polypropylene. The degradation or recombination of polypropylene was adequately controlled by an antioxidant, which stabilized the structure during sonication. Also, the use of an antioxidant was quite effective in improving the extrusion processability by delaying the instability of the extrudate to a higher shear rate. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

ZnS掺杂技术研究及应用现状

对现阶段国内外在ZnS及ZnS基材料掺杂改性方面的研究成果作一概述性介绍，综述了纳米级ZnS发光材料掺杂改性的基本机理，主要的掺杂技术、方法，并对多种掺杂元素的效果进行了分析比较。     

聚丙烯催化剂的研发进展

综述了用于丙烯聚合的Ziegler-Natta催化剂在给电子体技术及催化剂制备工艺等方面,茂金属催化剂在制备丙烯均聚物、丙烯共聚物及特殊聚丙烯等方面,非茂单活性中心催化剂在丙烯活性聚合、丙烯与极性单体共聚及水介质聚合等方面的研发进展;讨论了聚丙烯催化剂的前景。     

助催化剂对TiCl_4/MgCl_2催化丙烯高温聚合的影响

研究了助催化剂种类(三甲基铝、三异丁基铝、三正己基铝、三乙基铝和甲基铝氧烷)及其含量对无内、外给电子体的TiCl4/MgCl2催化剂催化丙烯高温(100℃)聚合性能的影响,并用结晶分级分析、示差扫描量热和凝胶渗透色谱等方法分析了所得聚丙烯的结晶熔融行为和微观结构。实验结果表明,聚合温度从70℃升至100℃时,TiCl4/MgCl2催化剂的定向能力基本不变;100℃聚合时,以烷基化能力较弱的三异丁基铝为助催化剂时TiCl4/MgCl2催化剂的活性最高,而采用烷基化能力最强的三甲基铝为助催化剂时TiCl4/MgCl2催化剂的活性最低;100℃聚合时,助催化剂的种类对TiCl4/MgCl2催化剂的定向能力影响很小。     

映秀湾水力发电总厂计算机监控系统改造设想

映秀湾水力发电总厂计算机监控系统建设较早，因受当时计算机应用技术限制，使得目前运行的计算机监控系统存在很多不足之处，为此，提出对该系统进行改造的设想，旨在能进一步满足映电总厂“无人值班”（少人值守）和安全经济运行的需要。     

胜利701气枪震源船改造设计

阐述胜利701气枪震源船震源系统的改造设计。改造设计使胜利701船达到了Ⅱ类航区海船的规范要求，满足了海上三维勘探和高分辨勘探的发展需要，为以后类似船舶的改造提供了经验。     

Co_3O_4纳米粒子的表面接枝改性研究

以含乙烯基的硅烷偶联剂(A-151)处理Co3O4纳米粒子,在Co3O4粒子表面引入乙烯基,然后以K2S2O8为引发剂,十二烷基苯磺酸钠(SDBS)为乳化剂,采用乳液聚合,在Co3O4粒子表面接枝甲基丙烯酸丁酯,研究了影响Co3O4纳米粒子表面接枝的有关因素,并优化工艺参数。采用红外光谱、X射线光电子能谱等手段对表面接枝进行了表征。结果表明,甲基丙烯酸丁酯已经被成功地接枝到纳米Co3O4粒子的表面。热流传感器的热流灵敏度测试结果表明,Co3O4粒子表面改性后,它与硅树脂的复合涂层提高了热流传感器的热流灵敏度,相对于未处理的Co3O4粒子涂层,传感器灵敏度从0.052 mV.cm2/W提高到了0.065 mV.cm2/W。     

Preparation of Compound Ultrafine CeO2 by Wet-Solid-Phase Mechanochemical Modification

To satisfy practical requirements from industrial applications, an alternate route for synthesis compound ultrafine CeO2 powders by wet-solid-phase mechanochemical modification using industrial grade hydrated cerium carbonate as raw material was proposed.The effect of modifier reaction percentage, reaction time, calcining temperature and modifier amount on particle size, density, suspensibility, and hardness of compound CeO2 powder was investigated.The phase evolutions of preparation process were characterized by XRD.SEM micrograph of the final product shows that compound CeO2 powders obtained are well-dispersed, spherically-shaped, uniformly-sized and submicron-sized particles.The method is readily available in raw material, low in cost, simple in process, and has great potential for industrialization.The compound CeO2 powders of different physical properties can be synthesized by controlling the above-mentioned influence factors in preparation process.     

催化裂化装置结焦问题的探讨

针对中国石化股份公司所属56套催化裂化装置近两年半以来由于结焦造成非计划停工的原因，进行分析、探讨并提出了解决办法。指出催化裂化装置的结焦虽然是不可避免的、但通过采取有效措施，可以把结焦对装置安全生产的危害降低到最小程度。     

Effect of RE－Al－N on Structures and Properties of M2 Cast High Speed Steel

M 2highspeedsteel (M 2steel)isamaterialwidelyusedintoolsanddies[1,2 ] .M 2steelischarac terizedbyalongsolidificationrangeandcomplexeu tecticreactions ,whichresultsinsegregationofalloy ingelementsandformationofseveraldifferenttypesofcarbidesduringsolidification[3,4 ] .Forconventionallyprocessedhigh speedsteels ,itisinevitablethatacoarsecarbidenetworkwillbeformedduringsolidifi cation .Coarseprimarycarbidestendtoresultinun evencarbidebandsdistributionafterasubstantialamountofhotprocessing[5] .Ma…